Beschreibung
The Micsig CP2100A Oscilloscope Probe is a current probe that can measure both DC and AC. Its split design makes the appearance small and exquisite. It uses a standard BNC interface and is suitable for most brands of oscilloscopes. It can also be used for multimeters via a connector. The maximum current can be measured is up to 100Apk (70Arms). Widely applicable in motor drives, industrial frequency, inverters, power supplies, avionics, and other fields.
Package List:
- 1x CP2100A Probe
- 1x USB Cable
- 1x Carry Box
|
|
|
|
|
|---|---|---|---|
|
The standard BNC interface makes this probe applicable to all BNC interface oscilloscopes. It also can be used on the multimeter after adding a suitable adapter. The maximum conductor diameter is 13mm |
Easy to use. The CP2100A Oscilloscope Probe has automatic and manual zero adjustment functions and can achieve zeroing and demagnetization automatically and manually. |
It can be powered by the USB port of the oscilloscope and doesn’t require any other extra power supply. |
Widely applicable in motor drives, industrial frequency, inverters, power supplies, avionics, and other fields. |
| Model Name: | CP2100A |
| Bandwidth: | DC~800KHz |
| Rise Time: | ≤ 583ns |
| Ranges: | 10A/ 100A |
| Output Sensitivity: | 0.1V/A (10A); 0.01V/A (100A) |
| DC Accuracy (typical): | 3% ± 50mA (10A); 3% ± 50mA (100A, 500mA~40Apk); 15% (100A, 40Apk~100Apk) |
| Signal Delay: | <150ns (10A); <200ns (100A) |
| Maximum Measurement Range: | 50mA~10Apk (10A); 1A~100Apk (100A) |
| Maximum Measurable Current: | 100Apk, 70.7Arms (DC+ACpk); 200Apk-pk, 70.7Arms (AC) |
| Maximum Working Voltage: | CAT Ⅲ 300V CAT Ⅱ 600V |
| Maximum Float Voltage: | CAT Ⅲ 300V CAT Ⅱ 600V |
| Maximum Conductor Diameter: | 13mm |
| Overload Indication: | The buzzer beeping, the button light flashing |
| Power Supply: | DC 5V |
